Masters Program in Engineering & Technology in Africa

Best Masters in Engineering & Technology in Africa 2017

Engineering & Technology

A Masters degree gives you the opportunity to either further your understanding of a particular question or take off in a completely different way using skills you have gained from your previous undergraduate degree.

Studies in engineering and technology prepare you for the technologically oriented workforce of today.

Members of the workforce with engineering and technology training are sought out by many industries including medical research and computer software development.

 

Many programs in Africa take place in a very unusual cultural and physical environment than most students are familiar with in the good old days. Come To Know to adapt to this living conditions is part of fun and the challenge of living there. The challenge is intellectual, emotional and physical.

Master's Degree in Engineering & Technology in Africa

Read More

Master of Engineering (Research Only)

Accra Institute Of Technology
Campus Full time September 2017 Ghana Accra

The objectives of the Master of Engineering are: to provide postgraduate education and prepare individuals for a lifelong career in critical areas of engineering and management related decision making in the public or private sectors. [+]

Top Master Degrees in Engineering & Technology in Africa 2017. The objectives of the Master of Engineering are: to provide postgraduate education and prepare individuals for a lifelong career in critical areas of engineering and management related decision making in the public or private sectors. The main objective of the Master of Engineering program is to attract outstanding individuals to pursue research of the highest standard, with relevance to the field of engineering and technology. This is a research-based program. Candidates will be required to conduct research work and submit a thesis for internal and external examination This program comprised three parts: Part I - Compulsory Core Courses Part II - Research Part III - Thesis Examination Part II - Research In Part II, candidates will continue to do research and thesis preparation through self-managed learning and or independent study under the guidance of a supervisor. Each candidate must meet the assigned supervisor at least three times per semester before he/she can progress in the subsequent semester. A candidate can choose any of the following specialization areas to pursue their research: a. Technology Management Research and Development b. Technology Development and Project Management c. Technology Management Technology Transfer and Implementation d. Technology Management Production and Quality Management e. Control Engineering f. Operation Research g. Production Engineering h. Civil Engineering and Geotechnic i. Electrical and Power Engineering j. Chemical Engineering k. Environmental Management l. Mechanical Engineering Part III - Thesis Examination In Part III, the student has completed the thesis and... [-]

Master In Computer Engineering

UNIVERSITÉ INTERNATIONALE DE TUNIS (UIT)
Campus Full time September 2017 Tunisia Tunis

The Master in Engineering Information Systems form on IT and decision tools businesses. This professional Master in two years allows you to specialize in Business Intelligence (BI) and Enterprise Resource Planning (ERP). [+]

The Master in Engineering Information Systems form on IT and decision tools businesses. This professional Master in two years allows you to specialize in Business Intelligence (BI) and Enterprise Resource Planning (ERP). Formerly known IT Methods Applied to Management Companies, the Master in Engineering Information Systems - ERP provides specialty theoretical training in applied computing and advanced practical training in new information technologies and communication. The graduate is able to work on strategic and policy aspects of companies and acquires expertise in the use of IT tools in Business Intelligence, Enterprise Resource Planning ... The dune series of certifications provides training on theoretical 3 semesters, mainly on SAP and validated by an internship in Tunisia or abroad. This practical semester is subject to a probation report and memory. [-]

Master In Computer Security

UNIVERSITÉ INTERNATIONALE DE TUNIS (UIT)
Campus Full time September 2017 Tunisia Tunis

The Master in Information Security Systems allows IT professionals after the license to specialize in computer security: the training is based on the physical aspect of virtual and data security: the graduate SSI certified expert after training . [+]

Top Master Degrees in Engineering & Technology in Africa 2017. The Master in Information Security Systems allows IT professionals after the license to specialize in computer security: the training is based on the physical aspect of virtual and data security: the graduate SSI certified expert after training . Training in Security of Information Systems (Master SSI) is spread over three academic semesters and 1 semester in a company or research center. The student acquires the basic and applied training with practical work and preparation for certifications and projects. certified expert The student is certified by the National Agency for Computer Security as an expert. During his training, he will carry out practical work and visits to ANSI. Other specific preparations to secure certifications are taught in draft form. German Academic Partnerships The International University of Tunis and the Hochschule Mannheim cooperate in academic and student exchanges. Students with a term ITU have the ability to perform a year-end internship or prepare their memory in Germany. This partnership also opens up opportunities in applied research and for graduates wishing to make a 3rd cycle. international professional partnerships Thanks to a SAP platform and a privileged partnership, ITU involves its students in different SAP challenges worldwide and prepares them for certifications, to navigate the oriented development and software security. [-]

MPhil in Information Management (RD)

University of Johannesburg
Campus Full time Part time 1 - 3  February 2018 South Africa Johannesburg + 1 more

The dissertation will constitute a decided contribution to knowledge of, and insight into, the subject discipline as well as the field of research. Qualifying students would also display competence in the application of related research methodology, and the proper written and/or oral communication of the research process and findings. [+]

The dissertation will constitute a decided contribution to knowledge of, and insight into, the subject discipline as well as the field of research. Qualifying students would also display competence in the application of related research methodology, and the proper written and/or oral communication of the research process and findings. Students should be able to reflect on their research decisions and applications to assess the effect thereof in the holistic context of the information industry. Admission requirements Any relevant Honours Degree on NQF Level 7 or 8 with an average of 65% for the Honours Degree. The Dean of the Faculty of Management may refuse a student admission to the Master’s qualifications if of the opinion that the student’s academic background is insufficient for the proposed studies. Duration of programme Full-time: 1 year minimum, 2 years maximum Part-time: 2 years minimum, 3 years maximum Contact details Name: Prof T du Plessis / Tel: +27 (0)11 559 3836 / Email: tduplessis@uj.ac.za [-]

MCom in IT Management (RD)

University of Johannesburg
Campus Full time Part time 1 - 3  February 2018 South Africa Johannesburg + 1 more

The purpose of the programme is to develop the applied competence of student on an advanced (executive) level in the mastering, analysis, interpretation and understanding of IT Management principles and methods. [+]

Top Master Degrees in Engineering & Technology in Africa 2017. The purpose of the programme is to develop the applied competence of student on an advanced (executive) level in the mastering, analysis, interpretation and understanding of IT Management principles and methods. Through a Master’s dissertation, the student will show evidence of scientific research and the ability to reflect thereon in the holistic context of IT Management. The programme will assist in the continuing professional development of experience and senior managers and leaders will be enhanced for both South African delegates and, increasingly, promote the development of IT Management skills for students and executive delegates within both local and international context. On completion of the programme, students will be able to demonstrate competence in: research writing and creative thinking skills in IT Management, display competence in the application of related research methodology, take strategic decisions in the context of IT Management, reflect on managerial decisions and applications to assess the effect thereof in the holistic context of IT Management. Admission requirements A BCom Hons (IT Management) Degree or equivalent Degree from any other university on NQF Level 7 or 8 with an average of at least 65% for the Honours Degree. Duration of programme Full-time: 1 year minimum, 2 years maximum Part-time: 2 years minimum, 3 years maximum Contact details Name: Dr B Gatsheni / Tel: +27 (0)11 559 1506 / Email: bgatsheni@uj.ac.za [-]

MEng in Structural Engineering (Lectured)

University of Johannesburg
Campus Full time Part time 18 - 24  February 2018 South Africa Johannesburg + 1 more

The purpose of the programme is to develop an engineer with advanced abilities in applying fundamental structural engineering sciences, design and synthesis to specific structural engineering problems in society at large. One of the main objectives is to develop an advanced capability to do fundamental structural engineering research independently and, in so doing, promote lifelong learning. [+]

The purpose of the programme is to develop an engineer with advanced abilities in applying fundamental structural engineering sciences, design and synthesis to specific structural engineering problems in society at large. One of the main objectives is to develop an advanced capability to do fundamental structural engineering research independently and, in so doing, promote lifelong learning. Qualification outcomes Exit level outcomes: The qualified student will be able to: Identify, assess, formulate, interpret, analyse and solve structural engineering research and development problems creatively and innovatively by applying relevant fundamental knowledge of i.e. mathematics, basic science and engineering sciences in the chosen field of research. Plan and manage structural engineering research projects demonstrating underlying fundamental knowledge, understanding and insight into the principles, methodologies and concepts that constitute socially responsible (to local and other communities) engineering research/development in the chosen field of research practice. Work effectively individually or with others as a member of a team, group, organization, and community or in multidisciplinary environments in the chosen field of research Organise and manage him/herself and his/her activities responsibly, effectively, professionally and ethically and take responsibility within his/her own limits of competence and to exercise judgment commensurate with knowledge and expertise, pertaining to the field of research Plan and conduct applicable level of investigations, research and /or experiments by applying appropriate theories and methodologies and perform data analysis and interpretation Communicate effectively, both orally and in writing, with engineering and specifically research audiences and the community at large in so far as they are... [-]

MEng / MPhil in Engineering Management (Lectured or Research based)

University of Johannesburg
Campus Full time Part time 12 - 24  February 2018 South Africa Johannesburg + 1 more

The purpose of the qualification is to develop an engineer with advanced abilities in applying fundamental engineering management sciences and/design and synthesis and related principles to specific management systems problems of society at large. One of the main objectives in this process is to develop an advanced capability to conduct fundamental systems engineering and management research independently. It also promotes a lifelong learning approach. [+]

Top Master Degrees in Engineering & Technology in Africa 2017. MEng in Engineering Management (Lectured) The purpose of the qualification is to develop an engineer with advanced abilities in applying fundamental engineering management sciences and/design and synthesis and related principles to specific management systems problems of society at large. One of the main objectives in this process is to develop an advanced capability to conduct fundamental systems engineering and management research independently. It also promotes a lifelong learning approach. Qualification outcomes Exit level outcomes: The qualified student will be able to: Identify, assess, formulate, interpret, analyse and solve engineering research and development problems creatively and innovatively by applying relevant fundamental knowledge of i.e. Mathematics, Basic Science and/or Engineering and Management Sciences in the chosen field of research. Plan and manage engineering management research projects, demonstrating fundamental knowledge, understanding and insight into the principles, methodologies and concepts that constitute socially responsible (to local and other communities) research/development in the chosen field of research practice. Work effectively,individually or with others,as a member of a team, group, organisation and the community or in multi-disciplinary environments in the chosen field of research. Organise and manage him/herself and his/her activities responsibly, effectively, professionally and ethically, accept responsibility within his/her limits of competence,and exercise judgement based on knowledge and expertise, pertaining to the field of research. Plan and conduct applicable levels of investigation, research and/or experiments by applying appropriate theories and methodologies,and perform data analysis and interpretation. Communicate effectively, both orally and in writing, with engineering... [-]

MEng / MPhil in Electrical and Electronic Engineering (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

The purpose of the qualification is to develop an engineer with advanced abilities in applying fundamental engineering sciences and/design and synthesis, and related principles to specific problems of society at large. [+]

MEng in Electrical and Electronic Engineering (Research - based) The purpose of the qualification is to develop an engineer with advanced abilities in applying fundamental engineering sciences and/design and synthesis, and related principles to specific problems of society at large. One of the main objectives of this process is to develop an advanced capability to conduct fundamental engineering research in dependently. It also promotes a lifelong learning approach. Qualification outcomes Exit level outcomes: The qualified student will be able to: Identify, assess, formulate, interpret, analyse and solve engineering research/development problems creatively and innovatively by applying relevant fundamental knowledge of i.e. Mathematics, Basic Science and Engineering Sciences in the chosen field of research. Plan and manage engineering research projects, demonstrating fundamental knowledge, understanding and insight into the principles, methodologies and concepts that constitute socially responsible (to local and other communities) research/development in the chosen field of research practice. Work effectively, individually or with others, as a member of a team, group, organisation and the community or in multi-disciplinary environments in the chosen field of research. Organise and manage him/herself and his/her activities responsibly, effectively, professionally and ethically, accept responsibility within his/her limits of competence, and exercise judgement based on knowledge and expertise, pertaining to the field of research. Plan and conduct applicable levels of investigation,research and/or experiments by applying appropriate theories and methodologies, and perform appropriate data analysis and interpretation. Communicate effectively, both orally and in writing, with engineering and specifically research audiences and the community at large, in so far... [-]

MTech in Operations Management (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

The qualification aims to develop intellectual and professional skills, and provides the student with the opportunity to show evidence of independent and original scientific work. [+]

Top Master Degrees in Engineering & Technology in Africa 2017. The qualification aims to develop intellectual and professional skills, and provides the student with the opportunity to show evidence of independent and original scientific work. This qualification will further provide the student with the opportunity to display competence in the application of relevant research methodology, and the proper written and/or oral communication of the research process and findings and to reflect on the research process and findings. Qualification outcomes and assessment criteria Conduct research and development in a specialised area and engage in the transfer of technology in the field of quantity surveying and property development. Admission requirements and selection criteria An applicant must hold a BTech: Operations Management or an equivalent qualification at NQF Level 7 as determined by a Status Committee. For admission to an MTech programme, all applications will be reviewed in terms of academic performance and prior qualifications, and if necessary, the applicants will be interviewed to ascertain, amongst others, interest in the postgraduate study and the department’s ability to accommodate the research interest. Conferment of degree The MTech: Operations Management will be conferred on students who have completed the research project and dissertation successfully. [-]

MTech in Quantity Surveying (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

This qualification is intended to enable graduates to apply integrated technical knowledge/skills and advanced analysis and problem-solving to a particular specialisation in quantity surveying, property development and other related fields, through involvement in an applied research project. [+]

This qualification is intended to enable graduates to apply integrated technical knowledge/skills and advanced analysis and problem-solving to a particular specialisation in quantity surveying, property development and other related fields, through involvement in an applied research project. Qualification outcomes and assessment criteria Conduct research and development in a specialised area and engage in the transfer of technology in the field of quantity surveying and property development. Admission requirements and selection criteria A BTech: Quantity Surveying, or an equivalent qualification of an equivalent standard OR A National Higher Diploma: Building Surveying plus approved work experience and other post-diploma qualifications. Students are selected on academic merit and approved field of study. Conferment of degree The MTech: Quantity Surveying will be conferred on students who have completed the research project and dissertation successfully. [-]

MTech in Metallurgy Engineering (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

At this level a qualifying student will be competent in applying specialised knowledge and research methodology in a metallurgical environment, thus contributing to the research and development needs of the metallurgical industry and mining community. The qualified student will be able to register with ECSA as a Professional Technologist. [+]

Top Master Degrees in Engineering & Technology in Africa 2017. At this level a qualifying student will be competent in applying specialised knowledge and research methodology in a metallurgical environment, thus contributing to the research and development needs of the metallurgical industry and mining community. The qualified student will be able to register with ECSA as a Professional Technologist. Qualification outcomes and assessment criteria The qualifying student should have the ability to: Initiate and execute applied research in a range of metallurgical activities to full completion. Function at middle to upper management level in a metallurgical environment. Admission requirements and selection criteria A Baccalaureus Technologiae: Engineering: Metallurgy, or an equivalent qualification of an equivalent standard. Conferment of the degree The MTech: Engineering: Metallurgy will be conferred on students who have completed the dissertation successfully. [-]

MTech / MEng / MPhil in Mechanical Engineering (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

This qualification is intended for students who will make a contribution, through research, to understanding the application and evaluation of existing knowledge in a specialised area of technology. They will also be able to demonstrate a high level of overall knowledge in that area, ranging from fundamental to advanced theoretical or applied knowledge. [+]

MTech in Mechanical Engineering (Research - based) This qualification is intended for students who will make a contribution, through research, to understanding the application and evaluation of existing knowledge in a specialised area of technology. They will also be able to demonstrate a high level of overall knowledge in that area, ranging from fundamental to advanced theoretical or applied knowledge. Qualification outcomes and assessment criteria Complete research successfully in engineering processes, products or systems Admission requirements and selection criteria A Baccalaureus Technologiae: Engineering: Mechanical, or an equivalent qualification of an equivalent standard. Conferment of the degree The MTech: Engineering: Mechanical will be conferred on students who have completed the dissertation successfully. MEng in Mechanical Engineering (Research - based) The purpose of the qualification is to develop an engineer with advanced abilities in applying fundamental engineering sciences and/design and synthesis and related principles to specific problems of society at large. One of the main objectives of this process is to develop an advanced capability to do fundamental engineering research independently. It also promotes a lifelong learning approach. Qualification outcomes Exit level outcomes: The qualified student will be able to: Identify, assess, formulate, interpret, analyse and solve engineering research and development problems creatively and innovatively by applying relevant fundamental knowledge of i.e. Mathematics, Basic Science and Engineering Sciences in the chosen field of research. Plan and manage engineering research projects,demonstrating fundamental knowledge, understanding and insight into the principles, methodologies and concepts that constitute socially responsible (to local and other communities) engineering research/development... [-]

MTech in Industrial Engineering (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

This qualification is intended to allow graduates to apply integrated operations techniques, together with advanced analysis and problem-solving, to a particular specialisation in the field of Industrial Engineering/Operations Management, through involvement in an applied research project. [+]

Top Master Degrees in Engineering & Technology in Africa 2017. This qualification is intended to allow graduates to apply integrated operations techniques, together with advanced analysis and problem-solving, to a particular specialisation in the field of Industrial Engineering/Operations Management, through involvement in an applied research project. Qualification outcomes and assessment criteria Conduct research and development in a specialised area and engage in the transfer of technology in the field of Industrial Engineering or Operations Management. Admission requirements and selection criteria A Baccalaureus Technologiae: Industrial Engineering, or an equivalent qualification of an equivalent standard. Conferment of the degree The MTech: Engineering: Industrial will be conferred on students who have completed the dissertation successfully. [-]

MTech in Extraction Metallurgy (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

At this level, a qualifying student will be is competent in applying specialised knowledge and research methodology in a metallurgical environment,thus contributing to the research and development needs of the metallurgic industry and mining community. The qualified student will be able to register with ECSA as a Professional Technologist. [+]

At this level, a qualifying student will be is competent in applying specialised knowledge and research methodology in a metallurgical environment,thus contributing to the research and development needs of the metallurgic industry and mining community. The qualified student will be able to register with ECSA as a Professional Technologist. Qualification outcomes The qualifying student should have the ability to: Initiate and execute applied research in a range of metallurgical activities to full completion. Function at middle to upper management level in a metallurgical environment. Admission requirements and selection criteria A Baccalaureus Technologiae: Extraction Metallurgy, or an equivalent qualification of an equivalent standard. Conferment of the degree The MTech: Extraction Metallurgy will be conferred on students who have completed the dissertation successfully. [-]

MTech in Construction Management (Research - based)

University of Johannesburg
Campus Full time Part time 1 - 2  February 2018 South Africa Johannesburg + 1 more

This qualification is intended to enable graduates to apply integrated technical knowledge/skills and advanced analysis and problem-solving to particular specialisation in construction management, property and related fields, through involvement in an applied research project. [+]

Top Master Degrees in Engineering & Technology in Africa 2017. This qualification is intended to enable graduates to apply integrated technical knowledge/skills and advanced analysis and problem-solving to particular specialisation in construction management, property and related fields, through involvement in an applied research project. Qualification outcomes Conduct research and development in a specialised area and engage in the transfer of technology in the field of construction management and property development. Admission requirements and selection criteria A BTech: Construction Management, or an equivalent qualification of an equivalent standard OR A National Higher Diploma: Building Surveying or Construction Supervision, plus approved work experience and other post-diploma studies. Students are selected on academic merit and approved field of study. Conferment of the degree The M Tech: Engineering: Construction Management will be conferred on students who have completed the dissertation successfully. [-]