75 Results in Civil Engineering
The master's course in civil engineering is a practical course with two fields of concentration: constructive engineering as well as geotechnical and traffic engineering. ... [+]
The master's course in civil engineering is a practical course with two fields of concentration: constructive engineering as well as geotechnical and traffic engineering. The focus of the concentration on constructive engineering lies in the design, construction and calculation of supporting structures in building construction and bridge construction. The knowledge obtained during the bachelor's course is reinforced and extended. Expertise from specialist knowledge in steel, solid, timber and civil engineering and on modern calculation techniques and methods are extensively communicated. The fields of concentration in civil and traffic engineering prepare the students for current and future demands in geotechnics, in transportation and bridge engineering as well as in environmental geology. These sometimes involve complicated substrate conditions or requirements in terms of environmental protection, area recycling, modern disposal engineering and flood prevention. The planning and construction of transport routes is another key area of this field of concentration.... [-]
The Master's degrees offer students a chance to advance their knowledge above that of the undergraduate level, and a chance to begin to specialize in one of the sub-disci ... [+]
Master's programs
The Master's degrees offer students a chance to advance their knowledge above that of the undergraduate level, and a chance to begin to specialize in one of the sub-disciplines of Civil or Environmental Engineering. All Master's degrees may require that students take one or more undergraduate courses as articulation (pre-requisite) if they are coming from a different undergraduate engineering or a related science field in order to become fully prepared for graduate work in Civil or Environmental Engineering.
Thesis Option
The Master's degree programs can either be research-oriented (thesis option) or non-research-oriented (non-thesis option). The Thesis option is the only option for students who are receiving a fellowship or assistantship (GTA or GRA) from the department. Therefore, it is strongly recommended for all full-time students, even those who think that they can pay for their own education. A minimum of twenty-four (24) semester hours of approved coursework along with a minimum of six (6) hours of thesis credits is required.... [-]
Few career paths are as vital as civil engineering when it comes to creating the future of modern civilization. ... [+]
Few career paths are as vital as civil engineering, when it comes to creating the future of modern civilization. Civil engineers are essential in supporting and improving aging infrastructure, developing new structures, and maintaining environmental standards for optimal sustainability.
Norwich is the first private university in the United States to offer a civil engineering program. Therefore, this program offers you a long, proven history of success, as well as contemporary relevance. Curriculum has been developed in alignment with recommendations from the American Society of Civil Engineers (ASCE) and blends civil engineering technical competencies with business management principles and project management fundamentals. The comprehensive curriculum will provide you with the knowledge to efficiently manage projects from design to implementation. Our learning model combines relevant theory with real-world application for immediate results. ... [-]
The Master's Degree Course intends to educate graduates who have an in-depth knowledge of the theoretical and scientific aspects of engineering, both in general and in-de ... [+]
Having adequate knowledge at the level of a Bachelor's degree, consistent with the disciplines covered by the Master's Degree course.
Duration of the course:2 years (120 credits)
Educational goals:The Master's Degree Course intends to educate graduates who have an in-depth knowledge of the theoretical and scientific aspects of engineering, both in general and in-depth concerning environmental and land engineering, allowing them to identify, formulate and solve, also in an innovative manner, complex problems or problems which require an interdisciplinary approach; think up, plan, design and manage complex and/or innovative systems, processes and services; design and manage highly complex experiments.... [-]
Wits University offers the International Institute of Welding course leading to the IWE ( International Welding Engineer -[BScEng graduates]) and IWT ( International Weld ... [+]
Wits University offers the International Institute of Welding course leading to the IWE ( International Welding Engineer -[BScEng graduates]) and IWT ( International Welding Technologist [BTech graduates]). Wits University is an Approved Training Body (ATB) for the International Institute of Welding (IIW). Successful completion of the courses (60% min/each module and a 95% attendance record) entitles the candidate to apply for IIW registration.
Benefits of the programmeThe intent is to equip candidates for a career in the welding industry, this implying an understanding of the practice of welding engineering underpinned by sound science.
Curriculum Outline / Modules taughtThe MEng in Welding Wits is made up of 12 courses divided into four main modules. The modules are welding processes, welding metallurgy, welded joint design and fabrication, and applications and case studies.... [-]
The Technical University of Oruro grants, on behalf of the Nation, the Master's Degree with international recognition supported by the Regional Convention on the Recognit ... [+]
12 months, Presencial - Virtual.
Accreditation and RecognitionThe Technical University of Oruro grants, on behalf of the Nation, the Master's Degree with international recognition supported by the Regional Convention on the Recognition of Studies, Diplomas and Degrees in Higher Education in Latin America and the Caribbean.
International recognition is granted in Peru by SUNEDU; in Mexico by the General Directorate of Accreditation, Incorporation and Revalidation; in Chile by the Ministry of Foreign Affairs; in Colombia by the Ministry of National Education; among others.... [-]
Accredited by the Romanian Ministry of Education since 2013, the masters “Structural Engineering” are 2 years post graduate programs, with teaching and examinations entir ... [+]
Let’s design the future together!
Accredited by the Romanian Ministry of Education since 2013, the masters “Structural Engineering” are 2 years post graduate programs, with teaching and examinations entirely in English language or in the French language.
Organised within the Faculty of Engineering in Foreign Languages (FILS) of the Technical University of Civil Engineering Bucharest (UTCB), the masters contains 3 semesters with lectures and exams and 1 semester entirely devoted to the master thesis. The master programs have a total of 120 ECTS (European Credit Transfer and Accumulation System).
The masters are opened to Romanian and foreign bachelor graduates. They also accommodate Erasmus+ exchange students. UTCB has 67 Erasmus+ agreements with universities from 17 countries. For the academic year 2016-2017 over 15 Erasmus students from France, Spain and Greece already registered to our masters.... [-]
The Masters of Engineering (ME) degree in Civil and Environmental Engineering with a concentration in Construction Engineering Management (CEM) is available for students ... [+]
The Masters of Engineering (ME) degree in Civil and Environmental Engineering with a concentration in Construction Engineering Management (CEM) is available for students that have a BS in Civil Engineering or from another engineering discipline.
The degree requirements are
Total of 30 graduate credits Three Core CEM Courses (9 credits) Three Civil and Environmental Engineering (CEE) courses taken from our elective list (9 credits) Three Business Management Courses (9 credits) ME Project (3 credits).The CEM track is designed for flexibility giving students the opportunity to choose courses that meet their needs and schedule. The CEM Program advisor is the Director of CEM (Erik Backus). The CEM project advisor will be selected through mutual agreement between the Director of CEM, the student, and project advisor. At the completion of the project work, the student will prepare a formal report and submit it to the project advisor. When the report is approved by the advisor, the project credits will be formally granted. Project credits can be taken in the summer.... [-]
The Master of Engineering is a non-thesis professional degree, based primarily on coursework and/or on an engineering project designed with the guidance of a faculty advi ... [+]
This degree provides you with a broad, practice-based education.
Degree requirementsTo earn this degree, you must complete a total of 30 credit hours:
applied mathematics course, in a relevant topic such as numerical methods, linear algebra, or statistical analysis (3 credit hours). engineering management course (3 credit hours).24 credit hours from:
general engineering, environmental engineering, civil engineering, mechanical engineering, or geology, selected with your committee’s approval (15 credit hours). elective courses (9 credit hours), which can include up to six credit hours in an optional practice-oriented project. Admission informationApplicants must select one primary emphasis in:... [-]
The University of Maryland offers a Master of Engineering and Graduate Certificate in Engineering in Fire Protection Engineering via both on-campus and distance programs. ... [+]
The programme will focus on the issues of urban planning and management using new city models and technologies. It will be led by international and Russian scholars and e ... [+]
The programme focuses on the issues of urban planning and management using new city models and technologies. It is led by international and Russian scholars and experts who are forming the current agenda for smart city development in Russia and worldwide. The key principle of the programme is learning by doing. The programme takes place in a laboratory-type environment where students try new technology, prepare prototypes, investigate and analyse the city through data, and develop projects that come as a relevant response to complex problems that affect modern cities.
The programme invites architects, designers, engineers, economists, entrepreneurs and graduates interested in the management of cities and technologies. The skills acquired during the programme provide the graduates with a variety of career opportunities in large technological companies, city administrations or their own innovative businesses.... [-]
The Natural Hazards and Risks in Structural Engineering (NHRE) master’s degree program has a strong international orientation. ... [+]
Master of Natural Hazards and Risks in Structural Engineering
The Natural Hazards and Risks in Structural Engineering (NHRE) master’s degree program has a strong international orientation. It trains students to apply themselves to demanding engineering tasks with regard to specific external influences, such as earthquakes. We teach students how to use modern equipment to assess the dangers and damage potential of natural phenomena, we show them how to create models and simulations, and we prepare them for conducting projects and- risk analyses of their own.In this way, the program provides students with key qualifications for engineering positions which require innovative, enterprising solutions for dealing with a wide variety of natural dangers, like earthquakes, floods and storms.The occurrence of an increasing number of natural hazards all over the world and their various effects on individuals, societies and modern economies is one of the major challenges for future decades. The master course in "Natural Hazards and Risks in Structural Engineering" faces this challenge by providing indispensable tools for taking into account those phenomena in the different design processes in civil engineering. Thereby, the master course aims at combining practical structural engineering with state-of-the-art concepts regarding computational mechanics, dynamics and probability theory/stochastic analysis. Consequently, the master course provides key qualifications for innovative work in the field of earthquake, flood and wind engineering and offers an international setting in which students will achieve both technical success and personal advancement.Main areas covered by the master course in "Natural Hazards and Risks in Structural Engineering" are... [-]
The Building Services specialization in the Building Constructions branch of the trimester consecutive master’s study programme Civil Engineering follows on from four-yea ... [+]
Abbreviation: S
Specialisation: Building Services
Length of Study: 1.5 years
Programme: Civil Engineering
Faculty: Faculty of Civil Engineering
Academic year: 2019/2020
Accredited from: 25.7.2007
Accredited until: 31.8.2023
Profile of the branch:
The Building Services specialization in the Building Constructions branch of the trimester consecutive master’s study programme Civil Engineering follows on from four-year bachelor’s courses of a similar technical nature. During their studies, students extend their knowledge of the latest scientific and technical findings in the field of Building Constructions and from the Building Services specialization.... [-]
Master Program “Structural Engineering” is a modern interdisciplinary study program offered at the Faculty of Civil Engineering since 2005-2006, the first master program ... [+]
Master Program “Structural Engineering” is a modern interdisciplinary study program offered at the Faculty of Civil Engineering since 2005-2006, the first master program taught in English in the field of Civil Engineering from Romania. The master program is intended to help the students gain expertise in designing civil engineering structures, develop skills in construction project management, finite element analysis and not only. The program gives additional qualifications on Management of European and international research projects and Business communication and ethics/legislation.... [-]
This Master's program aims at enhancing and deepening civil engineers' qualification in the field of anti-seismic security of buildings and facilities during their design ... [+]
This Master's program aims at enhancing and deepening civil engineers' qualification in the field of anti-seismic security of buildings and facilities during their design and implementation.
Bulgaria and many other countries have active seismic activities on their territories, which presupposes that they should be secured against this destructive natural phenomenon.
Taking special measures during the design of the buildings and facilities against seismic activities is related to one of the main requirements to investment projects – securing people's health and life.
The program trains specialists in the areas of geophysical and earthquake engineering who are capable of evaluating, predicting and reducing the risk of earthquakes.... [-]